Skip to main content
Sign in

Troubleshooting Optical Sensor Calibration Issues

  • Updated

The following table will guide users in troubleshooting possible sensor calibration issues. 

 

Problem: Probable Cause Solution:
Calibration is unsuccessful
  • Sensor misalignment
  • Check that optical sensors
    are properly installed
  • Speed detected
  • Make sure the combine is stationary
  • Grain elevator running too slow
  • Ensure threshing clutch is engaged and engine is running at normal operating speed
  • Sensors aren't plugged in
  • Ensure both sensors are plugged in and lights are on

Related articles