To calibrate the Moisture Sensor you will need to input an average moisture from a representative, harvested sample.
There are two ways to calibrate in the Mobile App:
- Long-press (hold for 2 seconds) the Moisture Tile on the Live Harvesting screen:
The App will display the average moisture from your trailing 30 minutes of harvesting. Measure the grain sample independently and enter the measured moisture. The App will automatically calculate the moisture offset for that crop type. Press complete to save.By default, the Moisture Sensor uses a trailing 30-minute average. The time interval can be changed under the Advanced Settings page of the mobile app.
- You can also calibrate the Moisture Sensor while performing a Crop Calibration. Each of the three yield calibration methods allow you to enter the actual average moisture from that calibration run. This will update the Moisture Sensor offset.
If you want to manually adjust the moisture offset, you can do so in the Add/Edit Crops page of the Mobile App. Select a crop to edit and enter a custom a moisture offset.
Note: for best results, calibrations should be completed in sections of the field that provide a good representation of the crop - avoid areas with heavy weeds and significantly lower yields.