To calibrate the Moisture Sensor you will need to input an average moisture from a representative, harvested sample.
There are three ways to calibrate the Moisture Sensor in the Mobile App:
Option One:
- On the Live Harvesting Screen, long-press (hold for 2 seconds) the Current Moisture Tile.
2. Enter in known moisture content and select Complete.
By default, the Moisture Sensor uses a trailing 30-minute average. The time
interval can be changed under the Advanced Settings page of the Mobile App.
Option Two:
- You can also calibrate the Moisture Sensor while preforming a Crop Calibration (How to Complete a Crop Calibration). Each of the yield calibration methods allow you to enter the actual average moisture from that calibration run. This will update the Moisture Sensor offset
Once you have reached the screen below in the crop calibration process you may enter your known measured moisture content, then select COMPLETE
Option Three:
If you would like to manually adjust the Moisture Sensor offset, you can do so in the Add/Edit Crops page of the Mobile App. Select a crop to edit and enter a custom moisture offset
- Select Add/Edit Crops
2. Select preferred crop then the pencil icon
3. Input Moisture Offset (%) and select SAVE
For best results, calibrations should be completed in sections of the field that provide a good representation of the crop. Avoid areas with heavy weeds and significantly lower yields.